Filter
Top Products
48 U2761A User’s Guide
2Features and Functions
Generate Pulse Waveform Using SCPI Commands
Example 1
-> *CLS; *RST //To reset the U2761A to default
power-on state, this command
can be ignored if this operation
is not required.
-> FUNC PULS //Sets the output to Pulse wave.
-> VOLT 5 VPP //Sets the output amplitude to
5 Vpp.
-> VOLT:OFFS 0 //Sets the output offset to 0.
-> PULS:PER 1 //Sets the pulse period to 1 s.
-> FUNC:PULS:DCYC 50 //Set the pulse duty cycle to 50%.
-> OUTP ON //Turns on output.