Alpine IVA-M700R Saw User Manual


 
42
English
Radio Operation
Tune in a desired radio station you wish to store
in the preset memory by manual or automatic
seek tuning.
Press the FUNC (PAGE 1/2) button.
Press and hold any one of the Function buttons
1 (P.SET1) through 6 (P.SET6) for at least 2
seconds until the Function Guide indicators
P.SET1 through P.SET6 in the display blinks
(for 5 seconds).
2
1
Press the Function button into which you wish
to store the station while the Function Guide
indicators P.SET1 through P.SET6 in the
display are blinking (within 5 seconds).
The Function Guide indicators in the display
stops blinking, indicating that the station has
been memorised at the Function button pressed.
3
PAGE
1/2
Manual Storing of Station
Presets
A total of 30 stations can be stored in the preset
memory (6 stations for each band; FM1, FM2,
FM3, MW or LW).
4
Repeat the above procedure (1 to 3) to store up
to 5 other stations onto the same band.
To use this procedure for other bands, simply
select the band desired and repeat the
procedure.
Note: If a preset memory has already been set
in the same Function button, it will be
cleared and the new station will be
memorised.
P.SET
1
P.SET
2
P.SET
3
P.SET
4
P.SET
5
P.SET
6
P.SET
1
P.SET
2
P.SET
3
P.SET
4
P.SET
5
P.SET
6
1
23