Filter
Top Products
15
6. TECHNICAL SPECIFICATIONS
SYSTEM SPECIFICATIONS
EXPANDER/GATE SECTION
INPUT
Type
Active balanced XLR and 1/4"JACK
Impedance
Balanced >50KOhm, Unbalanced>25KOhm
Operating level
+4dBu/ 10dBV
Max input level
+21dBu balanced and unbalanced
CMRR
Typically>55dB at 1KHz
OUTPUT
Type
XLR and 1/4" JACK
Impedance
Balanced 60 Ohm, Unbalanced 30 Ohm
Max output level
>+21dBu
RETURN
Type
1/4" JACK
Impedance
>10KOhm
Max input level
>+24dBu
SEND
Type
1/4" JACK
Impedance
2KOhm
Max output level
>+21dBu
Bandwidth
20HZ to 20kHz, +0/ 0.5dB
Noise
> 90dBu, unweighted, 22Hz to 22kHz
THD
<0.01% Typical at +4dBu, 1kHz, unity gain
<0.04% Typical at +20dBu, 1kHz, unity gain
IMD
<0.01% Typical SMPTE
Crosstalk
< 100dB, 22Hz to 22Khz
Type
Smart Ratio control Expander
Threshold
variable (OFF to +15dB)
Ratio
variable (1:1.2 to 1:8)
COMPRESSOR SECTION
Type
Smart Knee control Compressor
Threshold
variable ( 40dB to +20dB)
Ratio
variable (1:1 to :1)
Threshold Characteristic
variable (Smart knee control)
Manual Attack Time
variable (1ms to 150ms)
Manual Release Time
variable from 0.05s to 5s
Auto Attack Time
Typical 15ms at 10dB, 5ms at 20dB, 3ms at 30dB
Auto Release Time
Program dependent, typical 125dB/s
Output level
variable ( 20dB to +20dB)
PEAK LIMITER SECTION
Type
Smart Gain Control Peak Limiter
Threshold
variable (0 to OFF (+22dBu))
Ratio
:1
Stage 1 Limiter Type
Clipper
Attack Time "zero"
Release Time "zero"
Stage 2 Limiter Type
Program Limiter
Attack
program dependent, typ. <5ms
Release
program dependent, typ. 20dB/s