Filter
Top Products
- 42 -GA-7VASFS-FS Motherboard
English
Power Management Setup
CMOS Setup Utility-Copyright (C) 1984-2003 Award Software
Power Management Setup
ACPI Suspend Type [S3(STR)] Item Help
USB Device Wake-Up From S3 [Disabled] Menu Level
Soft-Off by PWRBTN [Instant-Off] [S1]
AC BACK Function [Memory] Set suspend type to
Keyboard Power On [Disabled] Power On Suspend under
Mouse Power On [Disabled] ACPI OS
PME Event Wake Up [Disabled]
Modem Ring Resume [Disabled] [S3]
Resume by Alarm [Disabled] Set suspend type to
x Date (of Month) Alarm Everyday Suspend to RAM under
x Time (hh:mm:ss) 0 0 0 ACPI OS
: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Figure 5: Power Management Setup
ACPI Suspend Type
S1(POS) Set ACPI suspend type to S1.
S3(STR) Set ACPI suspend type to S3. (Default Value)
USB Device Wake-up From S3
When set at Enabled, it allows USB Device to activate the system from ACPI S3 power saving
mode.
Enabled Enable USB Device Wakeup.
Disabled Disable USB Device Wakeup. (Default Value)
Soft-Off by PWRBTN
Instant-off Press power button then Power off instantly. (Default value)
Delay 4 Sec. Press power button 4 sec to Power off. Enter suspend if button is pressed less
than 4 sec.