Filter
Top Products
Apex III External Charger User’s Manual 3 External Charger Operation
COAM30004 Rev. 1.03 4/5/01 3-1
3 EXTERNAL CHARGER
OPERATION
Apex III External Charger Setup
The Apex III External Charger is a sophisticated electronic charging
device that automatically maintains your Apex III Battery Packs in
a fully charged state for use with the Apex III PDT. To ensure
proper operation, superior performance, and a long service life we
recommend that you follow the instructions put forth in this User’s
Manual. The following information is a guideline to be used during
initial installation of the unit.
Initial Setup Procedure
1. Remove the Apex III External Charger from the packing
carton and inspect the unit to ensure it is good physical
condition after shipping.
Charge State LED
Indicating Light [One Per Side]
Figure 3-1: Apex III External Charger
2. If you have ordered an External Charger Kit (Kit 1 or 2 –
refer to the Support Section of this manual for part numbers
and description), remove the associated Power Supply and
AC Line cable (if applicable) from the packing container.
Figure 3-2: External Charger
Power Supply
Figure 3-3: AC Line Cord (120
VAC Cord Shown)