Apex Digital External Charger Battery Charger User Manual


 
Apex III External Charger User’s Manual 3 External Charger Operation
COAM30004 Rev. 1.03 4/5/013-2
3. Record the unit specific information on the page provided at
the back of this manual (p. 4-5) for future reference before
permanently installing your Apex III External Charger.
4. Plug the female end of your AC Line cord into the Power
supply connector (refer to Figure 3-4).
AC Line Plug
[Power Supply Side]
Power Supply - AC Line Cord Connector
Figure 3-4: Power Supply AC Power Connection
5. Plug the round male Power Supply DC voltage connector
(cable permanently attached to Power Supply) into the DC
voltage connector on the back of the External Charger (refer
to Figure 3-5).
External Charger Back
DC Power Connector
Power Supply DC
Voltage Connector
Voltage
Key
9VDC 3.5A
Figure 3-5: External Charger
DC Voltage Connection
6. Plug the AC Line cord into an AC power receptacle (refer to
Figure 3-6).
AC Power Cord
AC Receptacle
[Correct Voltage Dependent
On Unit Ordered]
Figure 3-6: AC Power Connection