Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MaxMover FP
(fully programmable DMX)
563701
Control
563701 MaxMover (FP DMX) OR
563700 + 563704
Example DMX Console
(not an ARRI product)
FP (fully programmable) DMX Converter
FP DMX Converter
How does the fully programmable (FP) operation with DMX work?
This option provides full DMX functionality as found on most
moving lights. Therefore, in order to work in an enviroment with
other moving light applications where larger professional control
consoles are used, the fully programmable option is needed.
The option is either available as an upgrade 563704 for the
standard, analog MaxMover or under 563701 the MaxMover will
already come with the installed fully programmable DMX option.
The working principle is described as follows (Note: The FP DMX
controller may be switched to Basic DMX operation as well):
The position of the slider (PAN / TILT / FOCUS) equals an actual
position of the MaxMover. The speed of movement is usually
achieved by a “cue” executed by the control console. Therefore
the ‘FP Operation with DMX‘ offers a control channel for speed as
typical of many other DMX controllable units.
DMX channel setup: CH1-coarse Pan; CH2-fine Pan; CH3-speed
Pan; CH4-coarse Tilt; CH5-fine Tilt; CH6-speed Tilt;
CH7-Focus; CH8-movement release (50% +/-10%) and home
position (90-100%)
OR
MaxMover analog
563700
+
FP DMX Upgrade
563704
2 x Mega Claw
TM
2 x Universal Adapter Plate
Road Case
Analog Controller
Cable
Length 130‘
Already included in 563700
Possible Accessories
Ident.-No. Description
563705 Focus Unit
563720 Adapter for ARRISUN 60
563740 Mitchell Adapter
System Overview - Setup 3 (Fully Programmable Operation with DMX,
stage & location setup)
System Overview - Setup 3 (Fully Programmable Operation withDMX,
stage & location setup)