Filter
Top Products
BAHCO GROUND TOOTH TECHNOLOGY
3851 SANDFLEX
®
COBRA
™
PSG
™
3851 PSG is the ideal choice for the production cutting of medium
to large sections, especially on alloyed and stainless steels. Smooth
surface finish is ensured not only by the latest ground tooth technology
but also by the precise set. The special combination tooth design and
sharp cutting edges allow easy penetration while the HSS M42
tooth tips withstands high heat. The fatigue resistant backing material
ensures long tool life. 3851 PSG excels particularly on Stainless Steels
(AISI range), Ball Bearing Steels, Alloyed and Tool Steel.
As part of our continuous drive to improve product quality
and improve customer efficiency, we have recently
invested substantially in the latest ground tooth manufacturing
technology. The industry norm has been for many years to
mill the teeth, however customer demand and ever-changing
applications call for an even better performing
production-cutting blade. Ground tooth technology offers
benefits not only in tool life, but also in surface finish as
the uniform tooth height ensures that the blade slices
instead of tears through the material. Ground blades can
also cut a greater range of work piece sizes and shapes
than conventional bimetal blades. The advantages don’t
however stop there; our tests have shown that by using
our new ground tooth blades the speed of the cut can
also increase dramatically.
The reasons for changing to the new ground tooth are
compelling, the right blade choice can result in faster cuts,
longer blade life and increased product quality resulting in
a much reduced cost per cut and greater cutting efficiency.
27 x 0.9 1x.035 2/3 Combo PSG 3851-27-0.9-PSG-2/3
3/4 Combo PSG 3851-27-0.9-PSG-3/4
4/6 Combo PSG 3851-27-0.9-PSG-4/6
34 x 1.1 1-1/4x.042 2/3 Combo PSG 3851-34-1.1-PSG-2/3
3/4 Combo PSG 3851-34-1.1-PSG-3/4
4/6 Combo PSG 3851-34-1.1-PSG-4/6
41 x 1.3 1-1/2x.050 1.4/2 Combo PSG 3851-41-1.3-PSG-1.4/2
2/3 Combo PSG 3851-41-1.3-PSG-2/3
3/4 Combo PSG 3851-41-1.3-PSG-3/4
4/6 Combo PSG 3851-41-1.3-PSG-4/6
54 x 1.3 2x.050 1.4/2 Combo PSG 3851-54-1.3-PSG-1.4/2
54 x 1.6 2x.062 1.4/2 Combo PSG 3851-54-1.6-PSG-1.4/2
2/3 Combo PSG 3851-54-1.6-PSG-2/3
3/4 Combo PSG 3851-54-1.6-PSG-3/4
67 x 1.6 2-5/8x.062 2/3 Combo PSG 3851-67-1.6-PSG-2/3
3/4 Combo PSG 3851-67-1.6-PSG-3/4
4/6 Combo PSG 3851-67-1.6-PSG-4/6
DIMENSIONS TEETH TOOTH PRODUCT
MM INCHES PER INCH TYPE CODE
27 x 0.9 1x.035 2/3 Combo PHG 3854-27-0.9-PHG-2/3
3/4 Combo PHG 3854-27-0.9-PHG-3/4
4/6 Combo PHG 3854-27-0.9-PHG-4/6
34 x 1.1 1-1/4x.042 2/3 Combo PHG 3854-34-1.1-PHG-2/3
3/4 Combo PHG 3854-34-1.1-PHG-3/4
4/6 Combo PHG 3854-34-1.1-PHG-4/6
41 x 1.3 1-1/2x.050 1.4/2 Combo PHG 3854-41-1.3-PHG-1.4/2
2/3 Combo PHG 3854-41-1.3-PHG-2/3
3/4 Combo PHG 3854-41-1.3-PHG-3/4
54 x 1.6 2x.062 .7/1 Combo PHG 3854-54-1.6-PHG-7/1
1/1.4 Combo PHG 3854-54-1.6-PHG-1/1.4
1.4/2 Combo PHG 3854-54-1.6-PHG-1.4/2
2/3 Combo PHG 3854-54-1.6-PHG-2/3
67 x 1.6 2-5/8x.062 .7/1 Combo PHG 3854-67-1.6-PHG-7/1
1/1.4 Combo PHG 3854-67-1.6-PHG-1/1.4
1.4/2 Combo PHG 3854-67-1.6-PHG-1.4/2
2/3 Combo PHG 3854-67-1.6-PHG-2/3
DIMENSIONS TEETH TOOTH PRODUCT
MM INCHES PER INCH TYPE CODE
3854 SANDFLEX
®
KING COBRA
®
PHG
™
The 3854 PHG blade is ideally suited for high productivity cutting
of more difficult-to-cut materials. The patented precision
ground tooth design cuts a wide range of hard-to-machine
metals, including Inconel 718 and 625, hard Stainless Steels, Tool
steels, Mould steels, Zirconium and Titanium. Prolonged tool life
is ensured by M42 tooth tips, precise and consistent tooth height
and fatigue resistant backing material.The precise set ensures
a smooth finish.
▼
▼