Bahco Production Cutting Bandsaw Saw User Manual


  Open as PDF
of 4
 
BAHCO CARBIDE TIPPED BANDSAW BLADES
3868 CARBIDE TRIPLE SET
®
“XTRA”
™
The 3868 Carbide Triple Set “Xtra” is particularly suited for
medium to large work pieces and difficult to cut abrasive
materials such as stainless steel, titanium alloys and abrasive tool
steels. The triple set tooth design with good kerf clearance helps
to eliminate tooth loss. The strong set pattern provides good
swarf clearance and helps prolong tool life.
34 x 1.1 1-1/4x.042 2 TSX 3868-34-1.1-TSX-2
3/4 TSX 3868-34-1.1-TSX-3/4
41 x 1.3 1-1/2x.050 1.6 TSX 3868-41-1.3-TSX-1.6
2 TSX 3868-41-1.3-TSX-2
1.4/2 TSX 3868-41-1.3-TSX-1.4/2
2/3 TSX 3868-41-1.3-TSX-2/3
3/4 TSX 3868-41-1.3-TSX-3/4
54 x 1.3 2x.050 1.4/2 TSX 3868-54-1.3-TSX-1.4/2
54 x 1.6 2x.062 1.6 TSX 3868-54-1.6-TSX-1.6
2 TSX 3868-54-1.6-TSX-2
1.4/2 TSX 3868-54-1.6-TSX-1.4/2
1/1.25 TSX 3868-54-1.6-TSX-1/1.25
2/3 TSX 3868-54-1.6-TSX-2/3
67 x 1.6 2-5/8x.062 1/1.25 TSX 3868-67-1.6-TSX-1/1.25
.7/.1 TSX 3868-67-1.6-TSX-.7/1
80 x1.6 3-1/8x.062 .7/.1 TSX 3868-80-1.6-TSX-.7/1
DIMENSIONS TEETH TOOTH PRODUCT
MM INCHES PER INCH TYPE CODE
13 x 0.8 1/2x.032 4 TS 3869-13-0.8-TS-4
13 x 0.9 1/2x.035 3 TS 3869-13-0.9-TS-3
20 x 0.9 3/4x.035 3 TS 3869-20-0.9-TS-3
4 TS 3869-20-0.9-TS-4
27 x 0.9 1x.035 3 TS 3869-27-0.9-TS-3
4 TS 3869-27-0.9-TS-4
29 x 1.1 1-1/8x.042 2 TS 3869-29-1.1-TS-2
34 x 1.1 1-1/4x.042 3 TS 3869-34-1.1-TS-3
DIMENSIONS TEETH TOOTH PRODUCT
MM INCHES PER INCH TYPE CODE
3869 CARBIDE TRIPLE SET
®
The 3869 Carbide Triple Set is specifically designed for foundries
and non-ferrous and abrasive materials. The special triple set
configuration provides fast cutting and easy feeding. The 3869
can be used for both straight and radius cutting.
Carbide tipped band saw blades are ideal for production cutting of
stainless steels and difficult to machine steels, abrasive materials and
metals with a high alloy content. Carbide tipped blades also produce
a high quality finish, as well as ensuring fast cuts and long tool life.
Carbide tipped band saw blades are produced by welding carbide
tips into pockets on the fatigue resistant backing material and then
grinding to our patented tooth designs; this provides an ultra hard
tooth tip with a reduced risk of tooth stripping producing a high
performance bandsaw blade.
▼
▼
 previous