Black & Decker BDL190S Laser Level User Manual


 
LASER RADIATION. AVOID DIRECT EYE EXPOSURE.
RADIACIÓN LÁSER. EVITE LA EXPOSICIÓN DIRECTA DE LOS OJOS.
M
AXIMUM OUTPUT POWER< 5mW@633nm-670nm CLASS IIIa LASER PRODUCT. THIS PRODUCT
COMPLIES WITHTHE APPLICABLE REQUIREMENTS OF 21CFR PARTS 1040.10 AND 1040.11.
LÁSER CLASE IIIa CON MÁXIMA POTENCIA DE SALIDA < 5mW@633nm-670nm. ESTE PRODUCTO
C
UMPLE CON LOSREQUISITOSAPLICABLES DE LAS PIEZAS 1040.10 Y 1040.11 DE 21CFR.
D
ANGER
P
ELIGRO
WARNING: Read and understand all instructions. Failure to follow all instructions
listed below may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
Safety Instructions
Do not operate the laser in explosive atmospheres, such as in the presence of flammable
liquids, gases, or dust.
Use the laser only with the specifically designated batteries. Use of any other batteries
may create a risk of fire.
Store idle laser out of reach of children and other untrained persons. Lasers are dangerous
in the hands of untrained users.
Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one laser, may create a risk of injury when used on
another laser.
Do not use optical tools such as a telescope or transit to view the laser beam. Serious eye
injury could result.
Do not place the laser in a position which may cause anyone to intentionally or
unintentionally stare into the laser beam. Serious eye injury could result
Turn the laser off when it is not in use. Leaving the laser on increases the risk of staring
into the laser beam.
Repairs and servicing MUST be performed by a qualified repair facility. Repairs performed
by unqualified personnel could result in serious injury.
WARNING: DO NOT DISASSEMBLE THE LASER. There are no user serviceable
parts inside. Disassembling the Laser will void all warranties on the product. Do not modify
the product in any way. Modifying the tool may result in Hazardous Laser Radiation
Exposure.
Do not operate the laser around children or allow children to operate the laser. Serious eye
injury may result.
Do not remove or deface warning labels. Removing labels increases the risk of exposure
to radiation.
Position the laser securely. Damage to the laser or serious injury could result if the laser
falls.
CAUTION: Occasionally, pipes and electrical wiring may not be detected by this
product. The sensor will not detect hot wires inside metal pipe or metal conduit, behind
metallic wall covering, or behind some plywood or other dense materials.
CAUTION: Material thickness, type of material, moisture content, and other variables
can affect sensing results. The sensor may detect electric wiring or pipes in the same
manner that studs are detected depending on their location to the wall surface. Use
caution when drilling, nailing or cutting into walls, floors and ceilings which may contain
electrical wiring or pipes. These items may be detected by the sensor in the same manner
in which studs are detected. Because studs are normally spaced 16 inches (406 mm) or
24 inches (610 mm) apart and are usually 1-1/2 inches (38 mm) wide, beware of anything
closer together or of a different width. Always turn off the power when working near
electrical wires.
CAUTION: Use of controls or adjustments or performance of procedures other than
those specified in this manual may result in hazardous laser radiation exposure.
This product is intended for use in a temperature range of 50°F(10°C) - 104°F(40°C).
Liquid Crystal Display (First Aid Measures)
If liquid crystal comes in contact with your skin:
Wash area off completely with plenty of water. Remove contaminated clothing.
If liquid crystal gets into your eye:
Flush the affected eye with clean water and then seek medical attention.
If liquid crystal is swallowed:
Flush your mouth thoroughly with water. Drink large quantities of water and induce
vomiting. Then seek medical attention.
The label on your tool may include the following symbols.
V ..........................volts mW......................milliwatts
nm ........................wavelength in nanometers IIIa ......................Class IIIa Laser
........................AC Wire Warning
VEA EL ESPAÑOL EN LA CONTRAPORTADA.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO YPÓLIZADE GARANTÍA.
ADVERTENCIA: LÉASE ESTE INSTRUCTIVOANTES DE USAR ELPRODUCTO.
INSTRUCTION MANUAL
AA
AA
uu
uu
tt
tt
oo
oo
LL
LL
ee
ee
vv
vv
ee
ee
ll
ll
ii
ii
nn
nn
gg
gg
LL
LL
aa
aa
ss
ss
ee
ee
rr
rr
//
//
WW
WW
oo
oo
oo
oo
dd
dd
&&
&&
MM
MM
ee
ee
tt
tt
aa
aa
ll
ll
SS
SS
tt
tt
uu
uu
dd
dd
//
//
AA
AA
CC
CC
WW
WW
ii
ii
rr
rr
ee
ee
SS
SS
ee
ee
nn
nn
ss
ss
oo
oo
rr
rr
Cat No. BDL190S Form # 90565471
March 2011 Copyright © 2011 Black & Decker Printed in China
L
ASER RADIATION. AVOID DIRECT EYE EXPOSURE.
RADIACIÓN LÁSER. EVITE LA EXPOSICIÓN DIRECTA DE LOS OJOS.
MAXIMUM OUTPUT POWER< 5mW@633nm-670nm CLASS IIIa LASER PRODUCT. THIS PRODUCT
COMPLIES WITH THE APPLICABLE REQUIREMENTS OF 21CFR PARTS 1040.10 AND 1040.11.
L
ÁSER CLASE IIIa CON MÁXIMA POTENCIA DE SALIDA < 5mW@633nm-670nm. ESTE PRODUCTO
CUMPLE CON LOS REQUISITOS APLICABLES DE LAS PIEZAS 1040.10 Y 1040.11 DE 21CFR.
DANGER PELIGRO
LASER RADIATION. AVOID DIRECT EYE EXPOSURE.
R
ADIACIÓN LÁSER. EVITE LA EXPOSICIÓN DIRECTA DE LOS OJOS.
MAXIMUM OUTPUT POWER< 5mW@633nm-670nm CLASS IIIa LASER PRODUCT. THIS PRODUCT
COMPLIES WITH THE APPLICABLE REQUIREMENTS OF 21CFR PARTS 1040.10 AND 1040.11.
LÁSER CLASE IIIa CON MÁXIMA POTENCIA DE SALIDA < 5mW@633nm-670nm. ESTE PRODUCTO
CUMPLE CON LOS REQUISITOS APLICABLES DE LAS PIEZAS 1040.10 Y 1040.11 DE 21CFR.
DANGER PELIGRO
L
ASER RADIATION. AVOID DIRECT EYE EXPOSURE.
R
ADIACIÓN LÁSER. EVITE LA EXPOSICIÓN DIRECTA DE LOS OJOS.
MAXIMUM OUTPUT POWER< 5mW@633nm-670nm CLASS IIIa LASER PRODUCT. THIS PRODUCT
C
OMPLIES WITH THE APPLICABLE REQUIREMENTS OF 21CFR PARTS 1040.10 AND 1040.11.
L
ÁSER CLASE IIIa CON MÁXIMA POTENCIA DE SALIDA < 5mW@633nm-670nm. ESTE PRODUCTO
C
UMPLE CON LOS REQUISITOS APLICABLES DE LAS PIEZAS 1040.10 Y 1040.11 DE 21CFR.
DANGER PELIGRO
L
ASER RADIATION. AVOID DIRECT EYE EXPOSURE.
R
ADIACIÓN LÁSER. EVITE LA EXPOSICIÓN DIRECTA DE LOS OJOS.
M
AXIMUM OUTPUT POWER< 5mW@633nm-670nm CLASS IIIa LASER PRODUCT. THIS PRODUCT
C
OMPLIES WITH THE APPLICABLE REQUIREMENTS OF 21CFR PARTS 1040.10 AND 1040.11.
L
ÁSER CLASE IIIa CON MÁXIMA POTENCIA DE SALIDA < 5mW@633nm-670nm. ESTE PRODUCTO
CUMPLE CON LOS REQUISITOS APLICABLES DE LAS PIEZAS 1040.10 Y 1040.11 DE 21CFR.
DANGER PELIGRO
F
EATURES
A.) Laser On/Off Button
B.) Detector On/Off Button
C.) AC Wire Indicator LED
D
.) LCD Screen
E.) Wall Attachment -
Hanging Cone (keyhole)
F.) Wall Attachment -
Drywall Pin
G.) Self-Leveling Laser
Lines
H.) Battery Compartment
Cover (back side of unit)
A
2
3
T
a
y
l
o
r
M
a
d
e
T
a
y
lo
r
M
a
d
e
B
o
n
A
i
r
B
o
n
A
ir
C
.
C
.
C
.
C
.
T
a
y
l
o
r
M
a
d
e
B
o
n
A
i
r
B
o
n
A
ir
C
.
C
.
C
.
C
.
T
a
y
l
o
r
M
a
d
e
B
o
n
A
i
r
B
o
n
A
ir
C
.
C
.
C
.
C
.
LASER RADIATION. AVOID DIRECT EYE EXPOSURE.
RADIACIÓN LÁSER. EVITE LA EXPOSICIÓN DIRECTA DE LOS OJOS.
MAXIMUM OUTPUT POWER< 5mW@633nm-670nm CLASS IIIa LASER PRODUCT. THIS PRODUCT
COMPLIES WITH THE APPLICABLE REQUIREMENTS OF 21CFR PARTS 1040.10 AND 1040.11.
LÁSER CLASE IIIa CON MÁXIMA POTENCIA DE SALIDA < 5mW@633nm-670nm. ESTE PRODUCTO
CUMPLE CON LOS REQUISITOS APLICABLES DE LAS PIEZAS 1040.10 Y 1040.11 DE 21CFR.
DANGER PELIGRO
Catalog No. BDL190S
A
D
B
C
F
E
G
G
5
4
H
1
6
7
Bip
S
onido
Thank you for choosing Black & Decker!
Go to www.BlackandDecker.com/NewOwner
to register your new product.
PLEASE READ BEFORE RETURNING THIS
PRODUCT FOR ANY REASON:
If you have a question or experience a problem with your Black & Decker purchase, go to
HTTP://WWW.BLACKANDDECKER.COM/INSTANTANSWERS
If you can’t find the answer or do not have access to the internet,
call 1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. -- Fri. to speak with an agent.
Please have the catalog number available when you call.
for instant answers 24 hours a day.