10
Cleaning and maintenance
Warning!
u Do not store chemicals in the appliance.
u Do not use aggressive or abrasive cleaning agents.
u Always read and follow the manufacturer's instructions on
the cleaning agent you use.
u Dispose of the contaminated liquid in accordance with
local regulations.
Cleaning the tank
The appliance should be cleaned after use.
u Remove the power head (8).
u If there is any liquid left, drain the liquid back into the
original container or store in an appropriate container.
u Fill the tank (9) to 1/3 of its volume with clean water and soap.
Warning! Do not use ammable liquids for cleaning.
u Replace the power head (8).
u Spray the contents of the tank until the tank (9) is empty.
u Repeat the previous instruction as many times as
required.
Cleaning the lter (g. D1)
If the stream of the liquid weakens the lter can be clogged.
To clean the lter proceed as follow:
u Unscrew the tank cap (5).
u Remove the suction tube (6) from the tank (9).
u Clean the filter with warm soapy water.
Storing (g. G & H)
Warning! Do not store in locations where the temperature is
below 0 °C.
u Clean and dry all parts of the appliance when not in use
for more than one day.
u Attach the wand handle (4) onto the side clips (22) (fig. G).
u Fit the hose (23) with the Velcro fastener (24) to the power
head (8) (fig. H).
Accessories
The performance of your tool depends on the accessory used.
Black & Decker and Piranha accessories are engineered to
high quality standards and designed to enhance the
performance of your tool. By using these accessories you will
get the very best from your tool.
Troubleshooting
If the tool does not operate correctly, check the following.
Fault Possible cause Action
The stream of liquid Filter clogged. Check the lter at the
weakens or stops. end of the suction tube.
Clean the lter with
warm soapy water.
Weak battery. Recharge the battery.
Suction tube not all Push the suction tube the
way down in the completely down.
tank.
The unit will not start. Battery not charged. Check the battery
charging requirements.
Protecting the environment
Z
Separate collection. This product must not be
disposed of with normal household waste.
Should you nd one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
z
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker ofce at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com