Black & Decker LI2000 Welder User Manual


  Open as PDF
of 28
 
8
All Black & Decker Service Centers are
staffed with trained personnel to provide
customers with efficient and reliable power
tool service. Whether you need technical
advice, repair, or genuine factory replacement
parts, contact the Black & Decker location
nearest you. To find your local service
location, refer to the yellow page directory
under“Tools—Electric”orcall:1-800-544-
6986 or visit www.blackanddecker.com
Black & Decker (U.S.) Inc. warrants this
product for two years against any defects
in material or workmanship. The defective
product will be replaced or repaired at no
charge in either of two ways.
The first, which will result in exchanges
only, is to return the product to the retailer
from whom it was purchased (provided that
the store is a participating retailer). Returns
should be made within the time period of
SERVICE INFORMATION
FULL TWO-YEAR HOME USE WARRANTY
ACCESSORIES
THE RBRC™ SEAL
Recommended accessories for use with
your tool are available from your local
dealer or authorized service center. If you
need assistance regarding accessories,
please call: 1-800-544-6986.
WARNING: The use of any accessory
not recommended for use with this tool
could be hazardous.
TROUBLESHOOTING
Problem Possible Cause Possible Solution
•Batterywillnotcharge. •Chargernotpluggedinto •Plugchargerintoa
a working outlet. working outlet. Refer to
“Important Charging
Notes”formoredetails.
•Checkcurrentat
receptacle by plugging in
a lamp or other appliance.
 •Checktoseeif
receptacle is connected to
a light switch which turns
power off when you turn
out the lights.
 •Chargerjacknotfullyplugged •Check to be sure
into tool charging socket. charger plug is fully
inserted into tool
charging socket.
For assistance with your product, visit our website www.blackanddecker.com for the
location of the service center nearest you or call the BLACK & DECKER help line at
1-800-544-6986.
The RBRC™ (Rechargeable
Battery Recycling Corporation) Seal
onthelithium-ionbattery(orbattery
pack) indicates that the costs to
recycle the battery (or battery pack) at the
end of its useful life have already been
paid by Black & Decker. In some areas, it
isillegaltoplacespentlithium-ionbatteries
in the trash or municipal solid waste
stream and the RBRC program provides
an environmentally conscious alternative.
RBRC in cooperation with Black & Decker
and other battery users, has established
programs in the United States and Canada
tofacilitatethecollectionofspentlithium-ion
batteries. Help protect our environment and
conserve natural resources by returning the
tool to an authorized Black & Decker service
center for recycling. You may also contact
your local recycling center for information on
where to drop off the spent battery, or call
1-800-8-BATTERY.
Seal”).Callyourlocalretailerfordetails.
If you bring the batteries to a Black &
DeckerCompany-OwnedorAuthorized
Service Center, the Center will arrange
to recycle old batteries. Or, contact your
local municipality for proper disposal
instructions in your city/town.
To remove the battery pack for disposal:
1.) First, before attempting to disassemble
the product, turn it on and run it in either
direction until it stops to ensure a complete
discharge of the batteries.
2.) Remove the screws in the product housing
and lift the housing half from the tool.
3.) Disconnect the terminal clips from the
batteries and lift the batteries out.
4.) Place the battery in suitable packaging to
prevent a short circuit of the battery terminals.
5.) Dispose of batteries as per
recommended guidelines.
 previous next