cutting off small sections.
or throw the tool out of control.
METAL CUTTING (FIGURE H)
ferrous materials.
underside of the sheet. This will ensure a clean cut without
excess vibration or tearing of metal.
causes costly blade breakage.
NOTE: Spread a thin film of oil or other coolant along the line
ahead of the saw cut for easier operation and longer blade life.
Aluminum should be cut dry.
PROJECT TIPS
less strain on the motor while cutting.
against the workpiece. This will improve operator control and
minimize vibration.
to high speed steel teeth making the blade more flexible and less prone to breaking.
MAINTENANCE
Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the
To assure product
by authorized service centers or other qualified service organizations, always using
identical replacement parts.
ACCESSORIES
T-shank and U-shank jig saw blades can be used with this saw.
authorized service center. If you need assistance regarding accessories, please call:
1-800-544-6986.
WARNING: The use of any accessory not recommended for use with this tool could
be hazardous.
THE RBRC™ SEAL
program provides an environmentally conscious alternative.
retailer for recycling. You may also contact your local recycling center for information on
where to drop off the spent battery, or call 1-800-8-BATTERY.
11
H