9
TO INSTALL BATTERY PACK: Insert battery pack into tool, until an audible click is
heard as shown in figure B.
TO REMOVE BATTERY PACK: Depress
the battery release buttons as shown in
figure C and pull battery pack out of tool.
SAVE THESE INSTRUCTIONS FOR FUTURE USE
OPERATING INSTRUCTIONS
WARNING: Always wear proper eye, respiratory and hearing protection while
operating this tool.
Use clamps or another practical way
to secure and support the workpiece
to a stable platform.
by hand or against your body leaves it
unstable and may lead to loss of control.
figure D. Switch on saw motor and allow it
to obtain maximum speed before applying
pressure.
TRIGGER SWITCH (FIGURE E)
The tool is equipped with a switch lock-off
feature to prevent unintentional operation.
figure E, then
button.
NOTE: This tool has no provision to lock
other means.
B
C
D
E
3
4