Filter
Top Products
Specifications are subject to change. See bluesea.com/P12 for current information.
Included Components
P12
7521 AND 7522 BATTERY CHARGERS
77
1
3
4
7
8
6
5
9
Dielectric Grease
10
#12 x 1-1/4" sheet
metal screws (Use #3
Phillips screwdriver)
Used for Temperature Sensor and the
Optional Accessory P12 Remote Display
Connections (see pages 24–27). View
the MSDS for the Dielectric Grease at
bluesea.com/P12
RJ11 connector with peel and stick
adhesive, 15 ft (4.6m) long tether
2
M3 x 25mm pan-head machine screws (Use #1 Phillips screwdriver)
Recommended torque: 5–10 in-lb (0.6–1.1 Nm)
M4 x 10mm pan-head
machine screws,
(Use #2 Phillips
screwdriver)
Recommended torque:
10–15 in-lb
(1.0–1.8 Nm)
M3 x 30mm pan-head machine screws
(Use #1 Phillips screwdriver)
Recommended torque:
5–10 in-lb (0.6–1.1 Nm)
M6 serrated flange hex-nuts
(Use 10mm socket wrench
with extension)
Recommended torque:
70–80 in-lb (8–9 Nm)
M6 serrated
flange hex-nut
(see #7 above)
1. Four Mounting Screws
2. Two AC Strain Relief and Insulating Cover Screws
3. One AC Strain Relief and Insulating Cover
4. Three AC Termination Screws: AC Line: Gold, AC Neutral: Silver, AC Ground: Green
5. Three DC Strain Relief C-Clamp Screws
6. One DC Strain Relief C-Clamp
7. Four DC Termination Nuts
8. One DC Safety Ground Nut
9. One Battery Temperature Sensor
10. One Packet of Dielectric Grease
11. Accessory Pack Includes:
AC Line
Gold
AC Neutral
Silver
AC Ground
Green
#12 x 1-1/4"
sheet metal screw
M3 x 25mm
pan-head
machine screw
M4 x 10mm
pan-head
machine screws
M3 x 30mm
pan-head
machine screw
M6 serrated
flange hex-nut
Screw terminal
plug for ACR
connection
Accessory Pack