Filter
Top Products
-11-
Accessories
If an extension cord is
necessary, a cord with
adequate size conductors that is capable
of carrying the current necessary for your
tool must be used.
This will prevent
excessive voltage drop, loss of power or
overheating. Grounded tools must use 3-wire
extension cords that have 3-prong plugs and
receptacles.
NOTE: The smaller the gauge number, the
heavier the cord.
R
ECOMMENDED SIZES OF EXTENSION CORDS
1
20 VOLT ALTERNATING CURRENT TOOLS
!
WARNING
* 360° Auxiliary Handle
* Depth Gauge
* Carrying Case
** 3-Jaw Chuck
** Straight Chuck SDS Adaptor
(*= standard equipment)
(**= optional accessories)
Tool’s
Ampere
Rating
C
ord Size in A.W.G.
W
ire Sizes in mm
2
3-6
6
-8
8
-10
10-12
12-16
1
8 16 16 14 0.75 0.75 1.5 2.5
1
8 16 14 12 0.75 1.0 2.5 4.0
18 16 14 12 0.75 1.0 2.5 4.0
16 16 14 12 1.0 2.5 4.0 —
14 12 — — — — — —
25 50 100 150 15 30 60 120
C
ord Length in Feet Cord Length in Meters
BM 2610958557 07-08 6/30/08 2:24 PM Page 11