Filter
Top Products
3
Product Data - Die/Straight Grinders
Model number 1209 1210 1214 1215
Identification number 0 601 209 1 . . 0 601 210 1 . . 0 601 214 1 . . 0 601 215 1 . .
Collet capacity 1/4" shank 1/8"-1/4" NA 1/8"-1/4"
Max. RPM of accessories 16,000 27,000 6,800 27,000
Max. capacity of accessories
Mounted point 2" Dia. 1" Dia. NA 1" Dia.
Polishing wheel NA NA 5"OD x 1"thick 2" Dia.
Grinding wheel NA NA 5"OD x 1"thick NA
Accessory Listing
Wrench (22mm) * NA NA NA
Wrench (14mm) * NA NA NA
Shaft lock pin NA * NA NA
Rubber tool rest * NA NA NA
5" Guard NA NA * NA
Allen key (6mm) NA NA * NA
Outer flange NA NA * NA
Inner flange NA NA * NA
5/8"-11 nut NA NA * NA
(* = standard equipment)
Die Grinder Components
1. Collet nut 6. Collet 11. Inner flange
2. Spindle 7. Wing nut 12. Outer flange
3. Ventilation openings 8. Wheel guard cover 13. Nut 5/8"-11
4. Paddle switch 9. Wheel guard
5. Switch button 10. Mounting strap nuts
WARNING! “READ ALL INSTRUC-
TIONS”. Failure to follow the SAFETY RULES
identified by the BULLET (•) symbols listed
BELOW and other safety precautions, may
result in serious personal injury. Keep these
operating instructions with this product.
GENERAL SAFETY RULES
for all Power Tools
Work Area
• KEEP WORK AREAS CLEAN. Cluttered
areas and benches invite accidents.
• AVOID DANGEROUS ENVIRONMENT.
Don’t use power tools in damp or wet locations.
Do not expose power tools to rain. Keep work
area well lit.
• AVOID GASEOUS AREAS. Do not oper-
ate portable electric tools in explosive atmo-
spheres in presence of flammable liquids or
gases. Motors in these tools normally spark,
and the sparks might ignite fumes.
• KEEP CHILDREN AWAY. Do not let
visitors contact tool or extension cord. All
visitors should be kept away from work areas.
Personal Safety
• GUARD AGAINST ELECTRIC SHOCK.
Prevent body contact with grounded surfaces
such as pipes, radiators, ranges and refrigerator
enclosures. Rubber gloves and non-skid foot-
wear are recommended when working out-
doors, where damp or wet ground may be
encountered. A Ground Fault Circuit Inter-
rupter protected power line must be used for
these conditions.
BM 3609929341 12/03 12/16/03, 11:40 AM3