Filter
Top Products
-16-
(* = standard equipment)
(** = optional accessories)
* Screwdriver bit
* Auxiliary Handle
* Carrying case
* 1 hour charger
** Tether hook
Accessories
If an extension cord is
necessary, a cord with
adequate size conductors that is capable
of carrying the current necessary for your
tool must be used.
This will prevent
excessive voltage drop, loss of power or
overheating. Grounded tools must use 3-
wire extension cords that have 3-prong plugs
and receptacles.
NOTE: The smaller the gauge number, the
heavier the cord.
RECOMMENDED SIZES OF EXTENSION CORDS
120 VOLT ALTERNATING CURRENT TOOLS
!
WARNING
Tool’s
Ampere
Rating
Cord Size in A.W.G.
Wire Sizes in mm
2
3-6
6-8
8
-10
10-12
12-16
18 16 16 14 0.75 0.75 1.5 2.5
1
8 16 14 12 0.75 1.0 2.5 4.0
1
8 16 14 12 0.75 1.0 2.5 4.0
16 16 14 12 1.0 2.5 4.0 —
1
412—— ————
25 50 100 150 15 30 60 120
C
ord Length in Feet Cord Length in Meters
BM 2610944508 11-06 12/1/06 3:29 PM Page 16