Filter
Top Products
-10-
CLEANING AND EMPTYING
THE DUST CANISTER
It is recommended to loosen dust from the
microfilter by gently striking it against a solid
surface (Fig. 7).
To empty, lift lid of canister. Knock excess dust
out of the micro filter, or remove dust with your
fingers or a soft brush (Fig. 8).
You may notice that all the dust may not come
out of the canister. This will not affect sanding
performance but will reduce dust collection
efficiency.
NOTE: Do not wash the micro filter with soap
and water. Dust may become more firmly
lodged in the pores, which will reduce dust
collection, and damage the micro filter.
FIG. 7
FIG. 8
ATTACHING VACUUM HOSE
When the canister is removed from the tool, an
(optional) RS006 vacuum hose adapter can be
attached to the dust port. To use this feature,
attach the vacuum hose adapter to dust port,
and attach a Bosch vacuum cleaner hose to
the adapter. For connecting the adapter to a
1-1/4" or 1-1/2" vac hose, an optional Bosch
VAC002 or VAC024 hose adapter is also
required (Fig. 9).
FIG. 9
1-1/4”
OR
1-1/2” HOSE
BOSCH
VACUUM HOSE
VAC002 OR
VAC024
DUST
PORT
RS006 VACUUM
HOSE ADAPTER
Operating Instructions
TRIGGER "ON-OFF" SWITCH
To turn the tool "ON" squeeze the trigger
switch. To turn the tool "OFF", release the
trigger switch, which is spring loaded and will
return to the "OFF" position automatically.
To increase switch life, do not turn switch on
and off while tool is under load (Fig. 1).
BM 2609932842 03-12_BM 2609932842 03-12.qxp 3/12/12 9:21 AM Page 10