Filter
Top Products
English - 1
1 Dust protection cap
2 Locking sleeve
3 Chuck locking ring
4 Push-button for depth-stop adjustment
5 Impact stop switch
6 Rotational direction switch
7 On/Off switch
8 Button
9 Battery charge display
10 Battery
11 Auxiliary handle
12 Depth stop
13 Release button
14 Protective cap
15 Interlock
16 Knurled ring
Not all of the accessories illustrated or described are
included as standard delivery.
Measured values determined according to
EN 50 144.
Typically the A-weighted noise levels of the prod-
uct are: sound pressure level: 91 dB (A); sound
power level: 104 dB (A).
Wear hearing protection!
The typically weighted acceleration is 11 m/s
2
.
The machine is intended for hammer drilling in
concrete, brick and stone. It is also suitable for
drilling without impact in wood, metal, ceramic
and plastic. Machines with electronic control and
right/left rotation are also suitable for screw-
driving and thread cutting.
Tool Specifications
Rotary Hammer GBH 24 VFR GBH 24 VFR GBH 24 VRE GBH 24 VRE
Order number 0 611 261 7.. 0 611 261 5.. 0 611 260 7.. 0 611 260 5..
Rated power [W] 350 350 350 350
Output power [W] 270 270 270 270
Rated speed [rpm] 0–1 000 0–1 000 0 –1 000 0 –1 000
Impact rate [bpm] 0–4 400 0–4 400 0 –4 400 0 –4 400
Impact energy per stroke [J] 1.3 1.3 1.3 1.3
Tool holder SDS-plus SDS-plus SDS-plus SDS-plus
Drilling output:
- Concrete (twist drill bit) [mm] 4–20 4–20 4–20 4–20
- Wood [mm] max. 20 max. 20 max. 20 max. 20
- Steel [mm] max. 10 max. 10 max. 10 max. 10
Weight with battery,
approx.
[kg] 3.5 4.2 3.5 4.2
Battery NiCd NiCd NiCd NiCd
Order number 2 607 335 082 2 607 335 216 2 607 335 082 2 607 335 216
Temperature control NTC NTC NTC NTC
Rated voltage [V] 24 24 24 24
Capacity [Ah] 1.7 3.0 1.7 3.0
Weight, approx. [kg] 1.3 2.0 1.3 2.0
Please observe the order number of your machine. The trade names of the individual machines may vary.
Machine Elements Noise/Vibration Information
Intended Use
13 • 1 619 929 589 • TMS • 08.08.02