Filter
Top Products
-9-
Working with the Tripod
(See figure C)
A tripod offers a stable, height-adjustable
measuring support. Place the tool via the
tripod mount 8 onto the 1/4" male thread of
the tripod and screw the locking screw of the
tripod tight.
Holding Laterally against a Wall or Object
(see figure D)
For quick checking of heights, the tool can
be held by the contact surfaces 6 laterally
against a vertical wall, cabinets, etc. Take
care to hold the tool straightly and calmly.
Laser Viewing Glasses (Optional
Accessory)
The laser viewing glasses 10, filter out the
ambient light. This makes the red light of the
laser appear brighter for the eyes.
• Do not use the laser viewing glasses as
safety goggles. The laser viewing glasses
are used for improved visualization of the
laser beam, but they do not protect against
laser radiation.
• Do not use the laser viewing glasses as
sun glasses or in traffic. The laser
viewing glasses do not afford complete UV
protection and reduce colour perception.
Use with Attachments
Store and transport the tool only in the
supplied protective case 9.
Keep the tool clean at all times.
Do not immerse the tool into water or
other fluids.
Wipe off debris using a moist and soft cloth.
Do not use any cleaning agents or solvents.
Regularly clean the surfaces at the exit
opening of the laser in particular, and pay
attention to any fluff of fibers.
If the tool
should fail despite the care taken in
manufacturing and testing procedures, repair
should be carried out by an authorized after-
sales service center for Bosch power tools.
In all correspondence and spare parts
orders, please always include the 10-digit
article number given on the type plate of
the tool.
For repairs, s
end in the tool in the case 9.
ENVIRONMENT PROTECTION
Recycle raw materials & batteries
instead of disposing of waste. The unit,
accessories, packaging & used batteries should
be sorted for environmentally friendly recycling
in accordance with the latest regulations.
Maintenance and Service