Filter
Top Products
Soft Hard Laminates Steel Aluminum, Shell Ceramic Glass
Wood Wood Plastic Brass, etc. Stone
-- - 8 8 888
-- - 6 6 666
-- -88---
- - - 6-8 6-8 6-8 6-8 6-8
4 4 2-4 6 6 - - -
- 4-4----
4 4 2 4 - ---
44 - 4 4 4 - -
Catalog
Number
461, 462, 463
414, 422, 429
425, 427
423
403, 404, 405
530, 531, 532
428, 442, 443
535, 536, 537
13
Polishing Accessories
Catalog
Number
409, 420, 426,
540
542
545
560
561
562
Soft Hard Laminates Steel Aluminum, Shell Ceramic Glass
Wood Wood Plastic Brass, etc. Stone
- - 2-4 10 10 10 10 -
10 8-10 2-4 10 10 10 10 -
8-10 8 - - - - - -
For use on drywall. For best results, use at 35,000 rpm.
6-10 6-10 2-4 - 10 - - -
-- - - - -10-
Cutting Accessories
Catalog
Number
430, 431, 438
439, 440, 444
407, 408, 432
411, 412, 413
Soft Hard Laminates Steel Aluminum, Shell Ceramic Glass
Wood Wood Plastic Brass, etc. Stone
2-10 2-10 2-6 10 10 2-10 2-10 -
2-10 2-10 2-6 10 10 2-10 2-10 -
2-10 2-10 2-6 10 10 2-10 2-10 -
8 8 2-4 - 2-4 - - -
Sanding Bands and Discs
Catalog
Number
502, 503, 504,
505
Soft Hard Laminates Steel Aluminum, Shell Ceramic Glass
Wood Wood Plastic Brass, etc. Stone
6-8 8 2 10 8-10 - - -
Flapwheels
Catalog
Number
511
Soft Hard Laminates Steel Aluminum, Shell Ceramic Glass
Wood Wood Plastic Brass, etc. Stone
66 4 6 6 - - -
Finishing Abrasive Buffs
Catalog
Number
150
Soft Hard Laminates Steel Aluminum, Shell Ceramic Glass
Wood Wood Plastic Brass, etc. Stone
10
8-10
2-4
-
6---
Drill Bit
Catalog
Number
569, 570
Soft
Hard
Laminates
Steel
Aluminum,
Shell
Ceramic Glass
Wood
Wood Plastic Brass, etc. Stone
For use on wall and floor grout. 6-8 -
Grout Removal Bits
SPEED SETTINGS (CONTINUED)
Use only Dremel™ tested, high performance accessories.
* Speed for light cuts; Caution - burning on deep grooves. • Depending on cutting direction relative to grain.