Filter
Top Products
-7'322)'88,)409+*631
8,)43;)67396')&)*36)
1%/-2+%2=%77)1&0=%(.9781)28736
',%2+-2+%'')7736-)7 Such preventive
safety measures reduce the risk of starting the
tool accidentally.
4097
?
Clean the insert shank end of the accessory to
remove any debris, then lightly grease with a
light oil or lubricant.
Insert accessory into the chuck through the
dust shield, while twisting and pushing inward
until it locks automatically into place. Pull
outward on the accessory to be certain it is
locked into the chuck (Fig. 2).
4097
?
Accessories may be hot after
use. Avoid contact with skin
and use proper protective gloves or cloth to
remove.
To remove an accessory, pull locking sleeve
backward and pull bit forward. All accessories
should be wiped clean after removing (Fig. 3).
-8-
77)1&0=
!
WARNING
"#
The tool must be supported with the auxiliary
handle, which can be swiveled 360˚. To
reposition and/or swivel the handle, loosen
the hand grip, move the handle to the
desired position along the barrel and
securely retighten the hand grip (Fig. 4).
!
WARNING
FIG. 3
DUST
SHIELD
LOCKING
SLEEVE
FIG. 2
FIG. 4
HAND GRIP
BM 1619929E69 03-11:BM 1619929E69 03-11.qxp 3/28/11 2:03 PM Page 8