Filter
Top Products
Part Number (230V) BW-7670
Part Number (117V) BW-7670US
Maximum Power 4800Ws
Flash Duration (Maximum) 1/1600 sec @ 3000Ws
Flash Duration (Minimum) 1/4500 sec @ 500Ws
Guide Number
@ 3000Ws with 50º Keylite Reflector
86
Flashtube Assembly 1 x Single Tube (BW-7673)
User Replaceable
Modelling Lamp (117V) 10 x 12V 20W G4 Halogen LAM-760 (BW-7671)
Modelling Lamp (230V) 10 x 24V 20W G4 Halogen LAM-765 (BW-7672)
Cable Length 5m
Dimensions 204mm ø x 80mm (87.5mm with Baffle)
Aperture 100mm ø
Weight (inc. Cable) 2.7Kg
Weight (inc. Camera Bracket & Cable) 3.43Kg
FITTING / REMOVING QUAD CONNECTORS TO PACK
• Before use ensure that the pack is switched off.
• Fit the Ringflash Pro connectors to the pack. To ensure latch retention first insert the tab on the front of the cable plug into the pack socket (as
shown in fig. 10) and then press down firmly on the cable entry end (as shown in fig. 11).
• Switch the pack ‘on’ and ‘test’ flash the Ringflash Pro to ensure operational.
• After use always make sure that the Ringflash Pro has adequate time to cool down.
• To remove the plug make sure all power to the Ringflash Pro is switched ‘off’, press the spring latch away from the plug and lift from the
cable entry end (as shown in fig.12).
OPERATION
ACCESSORIES
Accessories available to fit the Ringflash Pro:
• BW-7674 Ringflash Pro Reflector (fig.13)
• BW-7675 110º Reflector with Diffuser (fig. 14)
SPARE PARTS AVAILABLE
BW-7671 12V 20W G4 Halogen (for use on 117V) BW-7672 24V 20W G4 Halogen (for use on 230V)
BW-7676 Glass Lens (Clear) BW-7677 Glass Lens (Frosted)
BW-7673 Flashtube Assembly
fig.10 fig.11 fig.12
fig.13 fig.14
5 6