Filter
Top Products
Page 6
FOR ANY REPAIRS OR ADJUSTMENTS – OTHER THAN THOSE DETAILED IN
THIS MANUAL – PLEASE CONTACT 1-800-LOCTITE.
8. Care and Maintenance
Every attempt has been made to make this exceptionally powerful tool both reliable
and trouble-free. However the following precautions should be noted:
• Make sure that the applicator is up to temperature before attempting to operate.
• Do not leave the applicator switched on for long periods without use. If the
applicator is not to be used for forty minutes or more, switch it off and restart when
required.
• Keep the applicator upright when not in use, never lay it on its side. Always use the
stand provided, or the optional bench stand or suspension unit (see Spares and
Accessory lists at the end of this manual).
• Do not use excessive force on the trigger. Ensure that the tool has fully warmed up
before use.
• Keep the nozzle clean to prevent adhesive build-up. This is easily done by wiping
the nozzle with clean paper or cloth while the nozzle is still warm.
9. Accessories and Spare Parts
Spare Parts Part Number
Complete Nozzle Assembly – Wide Angle 2mm 985122
(fitted as standard)
Applicator Stand 985069
Barrel PTFE 985071
Barrel Support Assembly 985091
Piston Support Assembly 985093
Piston 985095
Thermostat Assembly, 180°C 985123
Thermostat Assembly, 195°C (for polyamides) 985079
Heater Assembly 120 Volts 985080
PCB Assembly 985083
Thermal Fuse, Spacer Assembly 985076
Valve Body Airline Adapter 985240
Heater Housing Kit For 98037 (EVA Adhesive) 985232
Qty 1 – O-ring Heater Housing, item 5
Qty 1 – Heater Housing, item 6
Qty 1 – Fitting, item 30
Qty 1 – Ground Screw, item 38
Qty 1 - Lock Washer, item 42
Heater Housing Kit For 98041 (Polyamides Adhesives) 985239
Qty 1 – O-ring Heater Housing, item 46
Qty 1 – Heater Housing, item 47
Qty 1 – Fitting, item 30
Qty 1 – Ground Screw, item 38
Qty 1 - Lock Washer, item 42
Handle Kit 985228
Qty 2 – Moulded handles, item 1
Qty 6 – Casing Screws, item 37
Piston Support Hardware Kit 985229
Qty 1 – Washer, special with 4 holes, item 33