Filter
Top Products
5
The 4 LED charge indicators on the INPUT end of the battery cylinder (F)
allow you to monitor the status of the SolarBook’s internal battery. While the
battery is charging from the AC wall charger or the solar panels, the LEDs
will light up in sequence to show the charge level as shown in Fig. 1. The LED
indicating the current battery level will blink rapidly while charging. When
charging is complete, all LEDs remain on for 10 min., then shut o until the
Power button is pressed.
While the SolarBook is charging your connected device (Power button must
be pressed), the LEDs will monitor the SolarBook’s battery level as shown in
Fig. 2, with a single LED blinking once every 15 sec. (indicates active charging
but conserves battery power).
Fig. 1
Charging
In from AC/
Solar
>25% >50% >75% >90% FULL
Blinking
<25% <50% <75% <90% FULL
Fig. 2
Charging Out
to Device
UNDERSTANDING THE POWERSYNC POWER GAUGE
E
C
F
D
Solar panel surface
facing the sun