Filter
Top Products
Connecting to your 3G Broadband Router
through WiFi (Macintosh)
Firstly ensure your router is powered up and you have followed all the steps required to configure
and enable WiFi.
Check that wireless is both installed and enabled on your Mac. To check you will need to click on
the Wireless icon and select “Turn Airport on”.
Your Mac should automatically detect the new wireless network when in range, to view the
network click on the Airport icon and select the name of your network from the list:
You will now need to enter the password (key) you setup on the router previously in order to
be able to connect. You are able to select “Remember password in my keychain” which will
allow you to connect again automatically each time you are in range.