Filter
Top Products
Operation
-12- COLORado™ 1-Tri IP User Manual Rev. 01c
Continued from previous page
Reset
This setting allows the user to reset the COLORado™ 1-Tri IP fixture to its default
values, including the custom programs.
1) Go to SET> REST.
2) When prompted, enter the master access password as shown in Control Panel
Lock.
3) Wait for the reset process to finish.
Whites Setting
This setting allows the user to edit the temperature of the 11 white colors used in the
Macros channel. The 11 pre-set whites are configurable.
1) Go to CAL1.
2) Select a white color (WT. 1~11).
3) Select a color (Red, Green, or Blue).
4) Select a color value (0~255).
5) Repeat for the other colors (Red, Green, or Blue).
6) Repeat for the other white colors (WT. 1~11).
White Calibration
This setting allows the user to select the white color shown by the COLORado™ 1-Tri IP
when the color setting is RGBW and the DMX controller’s Red, Green, and Blue faders
are set to “255”.
1) Go to CAL2 > RGBW.
2) Select a color (Red, Green, or Blue).
3) Select a color value (0~255).
4) Repeat for the other colors (Red, Green, or Blue).