Filter
Top Products
4. Operating Instructions 8 9/13/2010 2:33 PM
4. OPERATING INSTRUCTIONS
Configuring the Starting Address
The LED PAR 56-24UVB
fixture uses two DMX channels. The highest channel that the fixture may
be set to in order to function properly is 511. Any address higher than this will prevent access to all
of the channels.
If this is your first time using DMX, we recommend reading the “DMX Primer” section in the
“Appendix”.
Control Panel Functions
Access control panel functions using the four buttons located directly underneath the LED display
on the included wired remote.
B
UTTON FUNCTION
<MENU>
Used to scroll through the
current operating mode,
as well as back out of the
current menu option
<UP>
Used to select increasing
advancement in the value
<DOWN>
Used to select decreasing
advancement in the value
<ENTER>
Used to select a value
and store it to memory
Menu Map
M
AIN FUNCTION SUB-FUNCTION SELECTION SUB-SELECTION DESCRIPTION
512 d001~d512
DMX Mode
Select for DMX mode
and the starting
address
AUtO
Auto Mode
The speed is
adjustable using
S--
SND
Sound-Active
Mode
This is the sound-
active mode. Use the
microphone sensitivity
adjust knob along
with this mode
U--
u 1~100
Static Dimmer
Select the intensity for
the static dimmer
S-- S001~S100
(default range
is
S050)
-
Select the speed
range for the auto
program (slow to fast)
MENU UP DOWN ENTER