Filter
Top Products
Scorpion™ Storm FXGB User Manual 16 12/12/2011
Setting the Starting Address
This DMX mode enables the use of a universal DMX controller device. Each fixture requires a "start
address" from 1 to 512. A fixture requiring one or more channels for control begins to read the data on the
channel indicated by the start address. For example, a fixture that uses 6 DMX channels and was addressed
to start on DMX channel 100, would read data from channels: 100, 101, 102, 103, 104, and 105. Choose
start addresses so that the channels used do not overlap, and note the start address selected for future
reference.
If this is your first time addressing a fixture using the DMX-512 control protocol, we suggest reviewing the
Appendix Section and reading the “DMX Primer”. It contains very useful information that will help you
understand its use.