Filter
Top Products
NEXUS™ Aw 7x7 QRG EN
4
Art-Net™
Connection
Art-Net™ is an Ethernet protocol that uses TCP/IP to transfer large
amounts of DMX512 data over a network. Art-Net™ uses the
Neutrik®
etherCON® RJ45 connection. An Art-
Net™ Primer is available from
www.chauvetpro.com. Art-Net™
Designed by and Copyright Alderamin
Group Ltd.
Kling-Net
Connection
Kling-Net is a network protocol to allow auto configuration of display
devices over ethernet. Kling-Net uses the Neutrik® etherCON®
connection.
Refer to the ArKaos MediaMaster™ software manual for
detailed instructions on installing and programming this product using this
protocol.
Art-Net™/Kling-
Net
Connection Diagram
Factory Reset
This procedure allows you to reset the product to its original factory
settings.
1. Unplug the NEXUS™ Aw 7x7 from power.
2. Press and hold <MENU/ESC> and <ENTER> simultaneously
while plugging the NEXUS™ Aw 7x7 back into power.
3. Release <MENU/ESC> and <ENTER>.
NOTE: Do not use WAN port!
Computer/Controller
(running Art-Net™
or Kling-Net protocol)
Router
To other
Art-Net™
or
Kling-Net
devices