EN NEXUS™ Aw 7x7 QRG
7
Control Panel
Description
Button
Function
<MENU/ESC>
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the currently
selected value into the selected function
<UP>
Navigates upwards through the menu list and increases the
numeric value when in a function
<DOWN>
Navigates downwards through the menu list and decreases
the numeric value when in a function
Menu Options
Main Level
Programming Levels
Description
Auto Show Auto 0–8
Show Speed 000–
100
9 automatic programs
Static
Dimmer
000–255
000–100%
Strobe
Selects the strobe frequency (0–20 Hz)
Dimmer Mode
Off
Dimming curve
Dimmer 1–3
Back Lite
On
Sets the amount of time control panel
backlight stays on
10S
20S
30S
Information
Auto Test
Sets product in test mode
Fixture Hours
Shows the amount of time the product has
been in use
Version
Shows the software version installed
IP Address
Shows the products IP address
Device ID
Shows the products ID number
DMX Address 001–512
Sets products DMX Address/Art-Net™
start channel
DMX Channel
5Ch
5-Channel mode
49Ch
49-Channel mode
54Ch
54-Channel mode
Master/Slave
Master
Selects Master mode
Slave
Selects Slave mode
Temperature
Shows the product’s internal temperature
Ethernet Settings Protocol
Kling-Net
Product uses Kling-Net protocols
Art-Net
IP Mode
DHCP
Router provides the IP address
Static
Uses the product’s pre-configured
IP address
Manual
Enter the IP address manually
Net
000–127
For use with consoles running Art-Net™ 3
Subnet
00–15
For use when addressing Art-Net™
Universe
Start
Channel
001–512