Filter
Top Products
Page 16 of 18 Intimidator™ Spot LED 150 User Manual (Rev. 5)
5. TECHNICAL INFORMATION
Product
Maintenance
Dust build up reduces light output performance and can cause overheating. This can
lead to reduction of the light source’s life and/or mechanical wear.
To maintain optimum
performance and minimize wear, you should clean your lighting products
at least twice a
month. However, be aware that usage and environmental conditions could be
contributing factors to increase the cleaning frequency.
To clean the product, follow the instructions below:
• Unplug the product from power.
• Wait until the product is cold.
• Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external surface/vents.
• Clean all external optics with a mild soap solution, ammonia-free glass cleaner, or
isopropyl alcohol.
• Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
• Softly drag any dirt or grime to the outside edges of the external optics.
• Gently polish the external optics until they are free of haze and lint.
Always dry the external optics carefully after cleaning them.
Do not spin the cooling fan/fans using compressed air
because you could damage
it/them.