Page 8 of 18 Intimidator™ Spot LED 150 User Manual (Rev. 5)
Before mounting the product, read and follow the Safety Notes.
Orientation
The Intimidator™ Spot LED 150
may be mounted in any position; however, make sure
adequate ventilation is provided around the product.
Rigging
• Before deciding on a location, always make sure there is easy access to the product
for maintenance and programming purposes.
• Make sure that the structure or surface onto which you are mounting the product
can support the product’s weight. See the Technical Specifications section of this
manual for weight information.
• When mounting the product overhead, always use a safety cable.
product securely to a rigging point, whether an elevated platform or a truss.
• When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The bracket has a 13 mm hole
, which is appropriate for
this purpose.
• When power linking multiple products, you must
always consider the length of the
power linking cable and mount the products close enough for the cable to reach.
• The rubber feet also serve as floor supports/allow for
mounting the product on the floor, make sure that the product and cables are away
from people and vehicles.
Mounting Diagram
Safety Loop
Attachment Point
