Filter
Top Products
L (Remote Alarm): Press this button to activate an
alarm. The ignition must be in OFF or ACC for the
remote alarm to work. When you press the remote
button, the headlamps will flash, the horn will sound
repeatedly and your interior lamps will turn on attracting
attention if you need it. The alarm will continue until
one of the following occurs:
• The remote alarm button is pressed a second time,
• the vehicle’s ignition is turned to ON or
• an alarm period of 110 seconds has elapsed.
V (Trunk Release): Press the button to release
the trunk.
Operating the remote keyless entry transmitter may
interact with the content theft-deterrent system, if your
vehicle has this option. See Content Theft-Deterrent
on page 2-14.
Transmitter Verification
This feature provides feedback that a command has
been received by the vehicle, if your key fob has been
programmed to Mode 3: Full, see FOB HORN
(Remote Audible Verification) under Vehicle
Personalization on page 2-38 for more information. The
headlamps and back-up lamps will flash on every
lock command and on the first unlock command. The
horn will also sound once for every lock and twice for the
first unlock command. Silent operation and other
options may be selected for this feature.
If your vehicle has the optional content theft-deterrent
system, the first time the remote unlock is received and
the alarm has been previously activated, three flashes
from the headlamps will be seen and three chirps will
be heard to indicate an alarm condition has occurred
since last arming. See Content Theft-Deterrent
on page 2-14.
2-5