Filter
Top Products
Page 2SKU 44568 For technical questions, please call 1-800-444-3353.
REV 03/01; 02/05; 03/05; REV 07/05
Note: Arc Welding Accessory Kit (SKU #35491) is available from Harbor Freight Tools. This kit includes: 3M Cable
with Electrode Holder, 2M Cable with Ground Clamp, Welding Mask and Combination Brush/Welding Hammer.
Specifications
METINOITPIRCSED
egatloVnepO
elbatsujdAV2.52/A031otV22/A84:noitarepoCA
elbatsujdAV42/A99otV12/A52:noitarep
oCD
tnemeriuqeRrewoPzH06,esahpelgnis,CAV032
rewoPdebrosbAsttawoliK4.5
elcyCytuD)CD(SPMA001@%51,)CA(SPMA031@
%01
daolrevOlamrehT
noitcetorP
nokcabetunim4;nwodtuhssetunim02:gnittesCD
nokcabetunim3;nwodtuhssetunim01:
gnittesCA
snoisnemiDsehcni)H(91x)W(2/1-31x)L(62
elbaCdnuorGtoof6,noitalusnielgnis,GWA4
elbaChcroTtoof6,noit
alusnielgnis,GWA4
droCrewoP devorppA.L.U,toof6,GWA41,detalusnielbuod,eroc-3
serutaeF
rotacidnithgilneergh
tiwhctiwsrewoP
rotacidnithgilrebmahtiwnoitcetorpdaolrevolamrehT
bonktnemtsujdatnerruC
seirosseccA
dleihSe
caF
hsurBgalS/eriW
eldnaHelbaCdnalluP
thgieWsbl53.85
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to re-
duce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.
3. Keep children away. Children must never be allowed in the work area. Do not let them
handle machines, tools, or extension cords.
4. Store idle equipment. When not in use, tools must be stored in a dry location to inhibit
rust. Always lock up tools and keep out of reach of children.