Chicago Electric 66127 Cordless Drill User Manual


 
SKU 66127 For technical questions, please call 1-800-444-3353. Page 4
Use the power tool and tool bits f.
in accordance with these instruc-
tions, taking into account the
working conditions and the work
to be performed. Use of the power
tool for operations different from
those intended could result in a haz-
ardous situation.
Battery tool use and care4.
Recharge only with the charger a.
specied by the manufacturer. A
charger that is suitable for one type of
battery pack may create a risk of re
when used with another battery pack.
Use power tools only with speci-b.
cally designated battery packs.
Use of any other battery packs may
create a risk of injury and re.
When battery pack is not in use, c.
keep it away from other metal ob-
jects, like paper clips, coins, keys,
nails, screws or other small metal
objects, that can make a connec-
tion from one terminal to another.
Shorting the battery terminals togeth-
er may cause burns or a re.
Under abusive conditions, liquid d.
may be ejected from the battery;
avoid contact. If contact acciden-
tally occurs, ush with water. If
liquid contacts eyes, additionally
seek medical help. Liquid ejected
from the battery may cause irritation
or burns.
Always switch to a fresh Battery e.
Pack when tool performance be-
gins to diminish. Severe heat is de-
structive to a Battery Pack. The more
heat generated, the faster the Battery
Pack loses power. A Battery Pack
that gets too hot can be permanently
damaged. Never over-discharge a
Battery Pack by using the tool while
tool performance is decreasing.
When tool performance begins to
diminish, stop the tool, recharge the
Battery Pack, and use the fresh Bat-
tery Pack for optimal performance.
Service5.
Have your power tool serviced by a.
a qualied repair person using
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained.
Drill Safety Warnings
Hold power tools by insulated grip-1.
ping surfaces when performing an
operation where the cutting tool
may contact hidden wiring or its
own cord. Contact with a ″live″ wire
will make exposed metal parts of the
tool ″live″ and shock the operator.
Maintain labels and nameplates on 2.
the tool. These carry important safety
information. If unreadable or miss-
ing, contact Harbor Freight Tools for a
replacement.
Avoid unintentional starting. Prepare 3.
to begin work before turning on the
tool.
Do not lay the tool down until it has 4.
come to a complete stop. Moving
parts can grab the surface and pull
the tool out of your control.
When using a handheld power tool, 5.

both hands to resist starting torque.
Do not leave the tool unattended 6.
when it is plugged into an electrical
outlet. Turn off the tool, and unplug it
from its electrical outlet before leav-
ing.