Filter
Top Products
Page 8 For technical questions, please call 1-800-444-3353. Item 67854
Common Problems and Remedies
1. Irregular Darkening Or Dimming
a. Headband has been set unevenly on both sides of helmet (unequal distances from the eyes to filter’s lens).
b. ResetHeadbandtoreducedifferenceindistancestofilter,ifnecessary.
2. Auto-Darkening Filter Does Not Darken Or Flickers
a. Front Cover Lens is soiled or damaged (change the cover lens).
b. Sensors are soiled (clean surface of the sensors).
c. Welding current is too low (turn Dark to Clear Adjustment switch to the “SLOW” position, if necessary).
3. Slow Response
a. Operating temperature is too low (do not use at temperatures below 23° F).
4. Poor Vision
a. Front/Inside Cover Lens and/or filter soiled (change it).
b. Insufficient ambient light.
c. Shade number is incorrectly set (reset shade number).
5. Welding Helmet Slips
a. Headband is not adjusted properly (must be lowered).
Stop using the Helmet immediately if any of the mentioned problems cannot be corrected.
SAFETY OPERATION MAINTENANCESPECIFICATIONS