Filter
Top Products
Page 8 For technical questions, please call 1-800-444-3353. SKU 68104
Maintenance and Servicing
Procedures not specically explained
in this manual must be performed
only by a qualied technician.
TO PREVENT SERIOUS INJURY
FROM ACCIDENTAL OPERATION:
Release the Trigger and unplug the tool from its
electrical outlet before performing any inspection,
maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY
FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal
noise or vibration occurs, have the
problem corrected before further use.
Cleaning, Maintenance,
and Lubrication
1. BEFORE EACH USE, inspect the general condition
of the tool. Check for loose hardware, misalignment
or binding of moving parts, cracked or broken
parts, damaged electrical wiring, and any other
condition that may affect its safe operation.
2. AFTER USE, wipe external surfaces
of the tool with clean cloth.
3. WARNING! If the supply cord of this
power tool is damaged, it must be replaced
only by a qualied service technician.
Cut-off Wheel Storage
and Handling
1. Handle Cut-off Wheels carefully to prevent
dropping or bumping. Do not use wheels
that have been dropped or bumped.
2. Store Cut-off Wheels in shelves, racks, boxes, or
drawers. Storage area must be kept dry, and above
freezing. Any grinding or cut-off wheels exposed to
humidity or freezing temperatures must not be used.