Filter
Top Products
Page 14 For technical questions, please call 1-800-444-3353. Item 68987
SAFETY OPERATION MAINTENANCESETUP
Maintenance and Servicing
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Power Switch of the tool off and unplug the tool from its electrical outlet
before performing any inspection, maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise or vibration
occurs, have the problem corrected before further use.
Cleaning, Maintenance, and Lubrication
BEFORE EACH USE, inspect the general condition of the tool. Check for loose
screws, misalignment or binding of moving parts, cracked or broken parts, damaged
electrical wiring, and any other condition that may affect its safe operation.
AFTER USE:
1. Remove and empty the Dust Bag.
2. Wearing ANSI-approved safety glasses, use compressed air to blow saw
dust out of the tool vents and off the surface of the tool.
3. Wipe external surfaces of the tool with clean cloth.
4.
WARNING! If the supply cord of this power tool is damaged, it
must be replaced only by a qualified service technician.