Filter
Top Products
Auto-Darkening
For technical questions, please call 1-800-444-3353. Page 2
Welding Helmet
Specifications
Model 91212 91214 94336 94337
Shell Designs Blue Flames Eagle Skull
Power Source
Solar Cells
(rechargeable battery included,
no additional battery required)
Solar Cells
(rechargeable battery included,
battery lifetime 4,000 hours)
Viewing Area 3.86” x 1.73” 3.74” x 2.44”
Operating Temperature 23 to 158° F 14 to 158° F
Clear State 4 DIN 3.5 DIN
Shade Range 9 to 13 DIN
Ultraviolet / Infrared
Protection
up to shade 14 all the time
Welding Protection Types
For All Arc Welding Processes;
Not for Laser Welding or Oxyacetylene Welding/Cutting
Shell Material High Impact-Resistant Plastic Polyamide Nylon
Lens
Switching Speed (Clear to Dark): 1/25,000 second
ANSI-Approved Lens
Weight 1.5 lb.
Power ON / OFF Fully Automatic
Storing Temperature -4 to 158° F
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Unpacking
When unpacking, check to make sure that the item is intact and undamaged. If any
parts are missing or broken, please call Harbor Freight Tools at the number on the cover of
this manual as soon as possible.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Do not use the Welding Helmet if the lens is cracked, if the lens or sensors are
dirty, or if the lens or front retaining frame is loose.
2. Keep work area clean. Cluttered areas invite injuries.
3. Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don’t expose to rain. Keep work area well lit. Do not use electrically-powered
tools in the presence of flammable gases or liquids.
4. Keep children away. Children must never be allowed in the work area. Do not let them
REV 06l