Filter
Top Products
Page 16SKU 94362 For technical questions, please call 1-800-444-3353.
6. Depress the Depth Control Lever (52) to hold the Saw Blade (10) in place. Use
the Blade Wrench (74) to unscrew and remove the Bolt (8). Release pressure on
the Blade Lock Lever. (See Figure I.)
7. Remove the Outer Flange (11). Then, raise and hold the Blade Cover (12) in its
“up” position while removing the Saw Blade. (See Figure I.)
DEPTH CONTROL LEVER (#52)
SAW BLADE (#10)
BOLT (#8)
OUTER
FLANGE
(#11)
BLADE COVER (#12)
SAW BLADE (#10)
BOLT (#8)
OUTER FLANGE (#11)
ARROW POINTING
TO FRONT
FIGURE I
8. Raise and hold the Blade Cover (12) in its “up” position while installing the
new Saw Blade (10). IMPORTANT: When installing the new Saw Blade, make
sure the arrow on the Saw Blade points to the front of the Saw.
(See Figure I.)
9. Replace the Outer Flange (11) and, while depressing the Depth Control Lever
(52), use the Blade Wrench (74) to firmly tighten the Bolt (8) in place.
(See Figure I.)
10. Replace the Inner Cover (7). Then replace the Plastic Cover (2), making sure to
turn the Knob (1) to lock the Plastic Cover in place.
(See Figures G, and H.)
11. Replace the
three
phillips Screws (33) on the left side of the Body (32).
(See Figure F.)