Filter
Top Products
SKU 94533 For technical questions, please call 1-800-444-3353 PAGE 4
PARTS LIST & ASSEMBLY DIAGRAM
Part Description Qty. Part Description Qty.
1 Main Unit 1 5 Connection Cord Cap 1
2 Power Cord 1 6 Fuse Holder 1
3 Output Cord 1 7 3 Amp Fuse 1
4 Permanent Connection
Cord
1 8 Temporary Connection
Cord
1
Problem: The Battery Charger is plugged into an electrical outlet, but no lights on
the Main Unit (1) are illuminated.
Possible Solutions:
Check to make sure the Power Cord (2) is properly plugged into a working 120
volt, grounded electrical outlet.
Check to make sure the connections to the vehicle’s battery posts are secure.
Open the Fuse Holder (6) to inspect the 3 AMP Fuse (7). If necessary, replace
the Fuse.
1.
2.
A.
B.
C.
To Charge A Battery Using The Screw Connectors
1
2
3
4
5
6
7
(Not Shown)
To Charge A Battery Using The Battery Clamps
8
3
1
2
TROUBLESHOOTING
NOTE: NO REPLACEMENT PARTS ARE AVAILABLE FOR THIS PRODUCT.