Filter
Top Products
Page 8SKUs
94596 &
94896
For technical questions, please call 1-800-444-3353.
Use extra caution when making a “Pocket Cut” into existing walls or other
blind areas. The protruding blade may cut objects that can cause KICKBACK.
Push the Saw Blades past the workpiece prior to releasing the Power
Switch.
Make sure to check the Blade Guard for proper operation. Never disable the
Guard. Do not use the Twin Cutter Saw if the Guard assembly does not operate
properly. Before each use, make sure the Blade Guard does not touch the Saw
Blades.
Make sure the workpiece is free from nails, metal rebar, and any other foreign
objects that could damage the Saw Blades or cause “kickback”.
CAUTION! When cutting metal, the Twin Cutter Saw produces extremely hot
chips (rather than sparks). Use caution to avoid accidental fire and/or injury to the
operator.
WARNING! Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities, contain chemicals known (to the State of Califor-
nia) to cause cancer, birth defects or other reproductive harm. Some examples of
these chemicals are: lead from lead-based paints, crystalline silica from bricks and
cement or other masonry products, arsenic and chromium from chemically treated
lumber. Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
(California Health & Safety Code § 25249.5, et seq.)
WARNING! People with pacemakers should consult their physician(s) before
using this product. Electromagnetic fields in close proximity to a heart pacemaker
could cause interference to or failure of the pacemaker.
WARNING! The warnings and cautions discussed in this manual cannot cover
all possible conditions and situations that may occur. It must be understood by the
operator that common sense and caution are factors which cannot be built into this
product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS
•
•
•
•
29.
30.
31.
32.