Filter
Top Products
Page 13SKU 96289 For technical questions, please call 1-800-444-3353.
AFTER USE, 3. clean the external surfaces of the tool with a clean, moist cloth and
mild detergent. Then dry. Do not use solvents.
CAUTION! 4. All maintenance, service, and repairs not mentioned in this manual
must only be performed by a qualied service technician.
WARNING! 5. If the supply cord of this power tool is damaged, it must be replaced
only by a qualied service technician.
Troubleshooting
Problem Possible Causes Possible Solutions
Heat Gun will not turn
on.
Power Switch set at “0”.1.
No power at outlet.2.
Cord not connected.3.
Turn Power Switch to “l” or “ll”.1.
Check power at outlet.2.
Check that cord is plugged in.3.
Unsatisfactory results. Improper heat setting.1. Adjust heat setting (“l” or “ll”) for 1.
correct application.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE
UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL
PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION
OF REPLACEMENT PARTS THERETO.
PARTS LIST
Part Description Q’ty
1 Power Cord & Plug 1
2 Terminal Block 1
3 Power Switch 1
4 Screw 7
5 Wire Clamp 1
6 Screw 3
7 Screw 1
8 Barrel Cover 1
9 Ring 1
10 Barrel 1
11 Heat Element 1
Part Description Q’ty
12 Barrel Mounting Flange 1
13 Fan Cover 1
14 Fan 1
15 Screw 2
16 Motor Mounting Plate 1
17 Motor 1
18 Rear Enclosure 1
19 Right Enclosure 1
20 Screw 2
21 Left Enclosure 1
22 Label 2