Filter
Top Products
Page 6SKU 96289 For technical questions, please call 1-800-444-3353.
The Nozzle becomes very hot. Do not lay the Heat Gun on ammable surfaces •
when operating the Gun or immediately after turning the Gun off. Always set
the Heat Gun on a at, level surface so that the Nozzle tip is directed upwards
and away from the supporting surface.
Clean up all removed paint and dust by wet mopping the oors. Use a wet •
cloth to clean all walls, sills, and any other surface where paint or dust is
clinging. DO NOT SWEEP, DRY DUST, OR VACUUM. Use a high phosphate
detergent or trisodium phosphate (TSP) to wash and mop areas.
At the end of each work session, place the paint chips and debris in a double •
plastic bag. Then close the bag with tape or twist ties and dispose of properly.
Remove protective clothing and work shoes in the work area to avoid carrying •
dust into the rest of the dwelling. Wash work clothes separately. Wipe shoes
off with a wet cloth that is then washed with the work clothes. Wash hair and
body thoroughly with soap and water.
This Heat Gun can ignite combustible uids and gases. Do not work in a 5.
potentially explosive environment. Check the surrouding area before starting the
work. Do not work on fuel or gas containers or in their vicinity, even when they
are empty.
Hidden areas such as behind walls, ceilings, oors, soft boards, and other 6.
panels may contain ammable materials that could be ignited by the Heat Gun
when working in these locations. The ignition of these materials may not be
readily apparent and could result in property damage and injury to people.
When working in these locations, keep the Heat Gun moving in a back-and-forth
motion. Lingering or pausing in one spot could ignite the panel or the material
behind it.
The hot air jet can injure people and animals. Touching the hot tube of the 7.
heating element or the Nozzle leads to skin burns. Do not touch the tube of the
heating element or the Nozzle when they are hot. Do not use the Heat Gun as a
hair dryer. Do not use the unit to heat up uids or to dry objects or materials that
are destroyed through the inuence of hot air.
This Heat Gun is for indoor use only.8.
Avoid unintentional starting. Prepare to begin work before turning on the tool.9.
Do not leave the Heat Gun unattended when it is plugged into an electrical 10.
outlet. Turn off the tool. Unplug it from its electrical outlet. And allow the tool to
completely cool before leaving.
Use clamps (not included) or other practical ways to secure and support the 11.
workpiece to a stable platform. Holding the work by hand or against your body is
unstable and may lead to loss of control.
This product is not a toy. Keep it out of reach of children.12.