Filter
Top Products
SKU 96299 For technical questions, please call 1-800-444-3353. PAGE 10
OPERATING INSTRUCTIONS
NOTE: For additional information regarding the parts listed in the following pages, refer to
the Parts List & Assembly Diagram.
WARNING! Remove the Battery Pack (19) from the tool and set the Rotation
Button (6) to its center, locked, position before making any adjustments, changing acces-
sories, or storing the tool.
Battery Pack
(19)
Trigger (12)
Gear Box with
Torque Ring (2)
Rotation Button (6)
Chuck (1)
In order to use the included screwdriver bits, you must first attach the Bit Adapter 1.
(22) into the Chuck (1). With the Chuck (1) pointing away from you, turn the Chuck
(1) counterclockwise. Insert the shank of the Bit Adapter (22) all the way into the
Chuck (1). Turn the Chuck (1) clockwise to lock the Bit Adapter (22) in place.
The Chuck accepts up to 3/8” diameter bits. Insert the appropriate bit for your 2.
application and tighten the Chuck firmly. Follow the same procedure as use for at-
taching the Bit Adapter (22). Never insert one of the included Bits (23) directly
into the Chuck. A smaller gauge than 3/8” will not be firmly secured and may
result in injury or property damage.
Secure the workpiece in place, using a vise or clamps (not included).3.
Warning! Never change Torque Setting while drill is still rotating, as this can damage the
Cordless Drill/Driver.
Decide on which setting to choose for application:4.