Filter
Top Products
SKU 96299 For technical questions, please call 1-800-444-3353. PAGE 5
Hold the tool by its insulated gripping surfaces when performing an opera-4.
tion where the Cordless Drill/Driver may contact hidden wiring. Contact with
a “live” wire will make exposed metal parts of the Cordless Drill/Driver “live” and
shock the operator.
Do not use the Cordless Drill/Driver or Charger if it has been dropped, dam-5.
aged, left outdoors, or immersed in liquid.
To avoid electric shock, do not pull or carry the Charger by its Power Cord or 6.
pull the Power Cord around sharp corners or edges. Do not unplug the Charger
by pulling on the Power Cord. Keep the Power Cord away from heated surfaces.
To avoid electrical shock, do not handle the Charger, the Adapter, or the Cord-7.
less Drill/Driver with wet hands.
Keep the Handles of the Cordless Drill/Driver dry, clean, and free from oil or 8.
grease.
Avoid unintentional starting. 9. Make sure you are prepared to begin work before
turning on the Cordless Drill/Driver.
Never leave the Charger unattended when it is plugged into an electrical outlet. 10.
Unplug the Charger from its electrical outlet before leaving. Place the Charger on
a solid surface such as a garage floor; never place on anything flammable.
PROPER BATTERY PACK CARE: Battery Pack (19) leakage may occur under 11.
extreme usage or temperature conditions. If Battery Pack fluid comes in contact
with skin, rinse with lemon juice and vinegar then wash with soap and water. If
the fluid comes into contact with the eyes, flush with water for several minutes and
contact a doctor immediately. Never burn the Battery Pack, as it can explode in a
fire. Do not charge the Cordless Drill/Driver with a leaking Battery Pack. Contact
local solid waste authorities for instructions on correct disposal or recycling of the
Battery Pack.
12. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities, contain chemicals known (to the State of California) to
cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are: lead from lead-based paints, crystalline silica from bricks and cement
or other masonry products, arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area,
and work with approved safety equipment, such as dust masks that are specially
designed to filter out microscopic particles. (California Health & Safety Code §
25249.5, et seq.)
13. WARNING! People with pacemakers should consult their physician(s) before
using this product. Operation of electrical equipment in close proximity to a heart
pacemaker could cause interference or failure of the pacemaker.