Chicago Electric 97594 Cordless Drill User Manual


  Open as PDF
of 34
 
Page 13SKU 97594 For technical questions, please call 1-800-444-3353.
Troubleshooting
Problem Possible Causes Possible Solutions
Tool will not start No power at outlet.1.
Cord not connected.2.
Cord Damaged3.
Carbon Brushes worn or 4.
damaged
Check power at outlet.1.
Check that cord is plugged in.2.
Check condition of cord3.
Check condition of Carbon Brushes, replace 4.
if necessary.
Tool operates
slowly or
intermittently
Worn or damaged Carbon
Brushes
Check condition of Carbon Brushes, replace if
necessary.
Chuck will not turn Direction Button of Trigger may
be in middle position.
Press Direction Button fully to left or right.
Drill bit slips in
chuck
Jaws are loose1.
Bit is jammed in work piece2.
Tighten chuck 1.
Tighten chuck, then operate tool in reverse 2.
to back bit out of work piece.
Follow all safety precautions whenever diagnosing or servicing the
tool. Disconnect power supply before service.
PLEASE READ THE FOLLOWING CAREFULLY


DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT







 previous next