Cisco Systems OL-6426-02 Saw User Manual


 
Contents
5
Cisco 1800 Series Integrated Services Routers (Fixed) Software Configuration Guide
OL-6426-02
Configuration Example 4-11
Verifying Your Configuration 4-12
CHAPTER
5 Configuring a LAN with DHCP and VLANs 5-1
Configure DHCP 5-2
Configuration Example 5-3
Verify Your DHCP Configuration 5-4
Configure VLANs 5-5
Verify Your VLAN Configuration 5-5
Switch Port Configurations 5-7
VLAN Trunking Protocol (VTP) 5-8
802.1x Authentication 5-8
Layer 2 Interfaces 5-9
MAC Table Manipulation 5-9
Maximum Switched Virtual Interfaces (SVIs) 5-9
Switched Port Analyzer (SPAN) 5-9
IP Multicast Switching 5-9
Per-Port Storm Control 5-10
Fallback Bridging 5-10
Separate Voice and Data Subnets 5-10
IGMP Snooping 5-10
CHAPTER
6 Configuring a VPN Using Easy VPN and an IPSec Tunnel 6-1
Configure the IKE Policy 6-3
Configure Group Policy Information 6-4
Apply Mode Configuration to the Crypto Map 6-5
Enable Policy Lookup 6-6
Configure IPSec Transforms and Protocols 6-6
Configure the IPSec Crypto Method and Parameters 6-7
Apply the Crypto Map to the Physical Interface 6-8
Create an Easy VPN Remote Configuration 6-9
Verifying Your Easy VPN Configuration 6-10
Configuration Example 6-10
CHAPTER
7 Configuring VPNs Using an IPSec Tunnel and Generic Routing Encapsulation 7-1
Configure a VPN 7-3
Configure the IKE Policy 7-3
Configure Group Policy Information 7-4